News Center

Focus on company news, release fresh information, welcome your attention

Solution

Industry Information

Company News

Home page

What is the function of the fully automatic dosing device

Release time:

2022-06-10 14:00

Source:

The fully automatic dosing device is a complete automatic dosing device that can mix polyaluminum chloride into a liquid and accurately add it to water. After preparation, the medication will be stored in a storage tank and then added to the prepared dosing point through a metering pump. The fully automatic dosing device consists of two tanks and two pumps, mainly composed of tanks, mixers, motors, brackets, solution buckets, and metering pumps.

1、 Intelligent control of fully automatic dosing device, time-saving and labor-saving

1. The dosing device is controlled by a PLC intelligent control system, with a high degree of automation;

2. The fully automatic dosing device has a fault automatic alarm function, can be connected to industrial Ethernet for network communication, and can monitor equipment and start/stop through the upper computer.

2、 Accurate dosage, stability, and persistence

1. The concentration of the medicine is constant, and the administration is accurate and stable;

全自动加药装置

2. The accessories of the fully automatic dosing device are made of imported parts, which have a long service life;

3. The fully automatic dosing device has a delicate structure, reasonable design, and a small footprint.

How to use a fully automatic dosing device

Users of the fully automatic dosing device configure drugs according to the proportion of the dosing solution and add them through a metering pump.

1. Connect the dosing device, then check each flange interface and tighten it to prevent liquid leakage.

2. Connect the power supply of the metering pump

(1) Open the junction box of the electrical control cabinet and connect the three-phase four wire power line that meets the requirements of the metering pump motor to the corresponding terminal.

(2) Start the mixer instantly by controlling the operation switch, observe the motor rotation, and fix the junction box after correct rotation. If the steering is not correct, adjust the phase sequence before fixing the junction box.

3. Close the discharge valve. Fill the medication container with medication solution.

4. Open the valve of the dosing system and start the metering pump.

Please pay special attention to the fully automatic dosing device:

When the dose is 1. The fully automatic dosing device starts all pipelines corresponding to the metering pump and closes other pipelines.

2. The top of the device is equipped with an overflow pipe to prevent the medicine from overflowing from the sewage pipe.

3. A tubular filter is installed at the inlet of the metering pump to prevent large particles from entering and damaging the metering pump.

Maintenance of fully automatic dosing device

The pipeline of the fully automatic dosing device should be kept unobstructed at all times, and the connection components, filters, inlet and outlet of the device should be inspected regularly and irregularly to observe whether there is any sediment in these components. If these symptoms are found, they should be cleaned up in a timely manner. Regularly inspect the mixing device of the fully automatic dosing device to see if the mixing shaft rotates flexibly, if the impeller is twisted, and if the connecting sleeve is loose, in order to avoid excessive shaft torque and consumption of mixing power. If damaged, replace it promptly.

The bubble medicine barrel is developed by scientific formula and blown. It has various colors, beautiful appearance, acid and alkali resistance, corrosion resistance, anti-leakage, no fading, no deformation, and meets the packaging indicators. It is currently the long-distance transportation of chemical product packaging materials. Ideal choice. The bubble medicine barrel has the advantages of seamless integral polyethylene (PE), impact resistance, aging resistance, light weight, no leakage, acid and alkali resistance, long service life, and compliance with sanitary standards. Its performance is far better than glass fiber reinforced plastic, Traditional containers such as plastic welding and steel-lined rubber. Bubble barrels can be lined with different materials provided by steel drum suppliers and can be stored and transported for several months in similar environmental conditions.

Application of Stacked Screw Sludge Dewatering Machine in Textile Wastewater Treatment

Application of stacked screw type sludge dewatering machine in textile wastewater treatment. The water demand of the textile industry is very large, in which the treatment of sewage discharge is also very large, textile wastewater water flow, high content of organic compounds, water complex. PH value of sewage, CODCr, BOD5, color, etc. are not the same. The treatment method covers a large total area, the project investment is large, the renovation cost is expensive, and the product cost continues to rise. And whether it is anaerobic fading method or biofilm method, the treatment method of residual sludge is indispensable, so the sludge stack screw sludge dehydrator can play a great role, better overcome the textile wastewater residue.

Advantages of applying stacked screw sludge dewatering machine to carry out dedrying

Stacked screw sludge dewatering machine has compact structure and low comprehensive price compared with other types of dewatering machine. The structure is compact, the adjustment maintenance position is less, the daily management is simple. Turn on the main power switch of the equipment and the equipment, and then check the status of the display and the display lamp to see if there is any problem. After drying, it cannot be discharged from the sewage outlet. Instead, it can be immediately sent to the mud truck according to the shaftless screw conveyor, thus creating a stacked screw sludge dehydrator and reusing it many times. When the stacked screw sludge dewatering machine is in normal operation, the melted sludge is discharged in the form of filter cake. Proposed large, medium and small industrial equipment application spiral

Automatic dosing device: improve the efficiency of sewage treatment

The automatic dosing device can improve the efficiency and quality of sewage treatment and reduce operating costs, which is a kind of sewage treatment equipment with wide application prospects.

How to choose their own sludge dewatering equipment

Article Introduction: This article introduces how to choose the sludge dewatering equipment that suits you, focuses on the automatic dosing device, and provides some useful suggestions to help you make the right choice.

Working principle of automatic dosing device

Want to know more about the working principle and application of automatic dosing device, read the details of this article

说明页内容……

Sweep and learn more.

Telephone:15900868027(Mr. Xu)

Mailbox:41786798@qq.com

Address: 1059 Jiangyan Avenue, Jiangyan District, Taizhou City, Jiangsu Province

Business License